12v 10a constant voltage led driver with triac dimming controller
specifications | |
|
model | SMT-012-120VT | SMT-024-120VT | |
output | dc voltage | 12V | 24V |
voltage accuracy | ±0.5V | ±0.5V | |
rated current | 10.00 a | 5.00 a | |
rated power | 120 w | ||
input | voltage range | 10 0 ~ 13 0 v a c / 170 ～ 2 65 v ac | |
frequency range | 47 ～ 63HZ | ||
power factor ( Typ. ） | PF≧0. 8 / 110V,PF ≧0. 81 /170V , PF≧0. 82/ 220V , PF≧0. 82 /265V | ||
full load efficiency （ Typ. ） | > 8 3 % | > 8 3 % | |
ac current （ Typ. ） | 0.66A/110VAC 0. 63 A/170VAC 0. 57 A/220VAC 0. 52 A/265VAC | ||
leakage current | ﹤ 0.2 7 mA/ 110V/ 220VAC | ||
protection | s hort c ircuit | hiccup mode, recovers automatically after fault conditionis removed. | |
over voltage | ≦ 140VAC(100~130V) , ≦2 7 0VAC (170~265V) | ||
Envi r onment | working TEMP. | -40 ～ +60℃ | |
working humidity | 20 ～ 9 0 %RH,non-condensing | ||
storage TEM.,Humidity | -40 ～ +80℃ ， 10 ～ 95%RH | ||
TEMP.coefficient | ±0.03%/℃ （ 0 ～ 50℃ ） | ||
vibration | 10 ～ 500Hz ， 2 g 1 0 min./1 cycle ， period for 60 min. each along X,Y,Z axes | ||
Safety&EMC | safety standards | en - 6 0950-1 , EN61347-1 EN61347-2-13 | |
withstand voltage | I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC | ||
isolation resistance | I/P-O/P ： 100MΩ/500VDC/25℃/70%RH | ||
EMC emission | compliance toEN55015,EN61000-3-2 (≧50%load) | ||
EMC immunity | compliance to EN61000-4-2,3,4,5,6,8,11,EN61547 alight industrylevel （surge4KV） | ||
Others | weight | 1.3 kg | |
size | 2 3 0* 70*46 mm （ L*W*H ） | ||
packing | 329*279*176 mm , 10PCS /ctn | ||
notes | 1. all parameters not specially mentioned are measured at 110V/ 230VAC input , rated load and 25℃of ambient te m perature. 2. Ripple& noi se are measured at 20MHz of bandwidth by using a 12”twisted pair-wire terminated with a 0.1uf &47uf parallel capacitor. 3. Tolerance:includes set us tolerance,line regulation and load regul ation . | ||
| label |
| ||
 |  |  |  |
features
- high efficiency,save energy ,protected environment.
- high stability and low ripple, increase light efficiency and decrease light attenuation.
- meet to safety standard and EMC
- assure led stability long lift and light efficiency by constant voltage.
- Protections:Short circuit/Overload/Over temperature
- cooling by free air convection
- 100% full load burn-in test.
- suitable for led lighting
safety
- safety standards : IEC 61347 –2–11 , EN55015,EN61000
- withstand voltage : I/P-O/P: 3000KVAC
- isolation resistance : I/P-O/P:100M Ohms/500VDC
application
- indoor led illuminating lights
- led Neon, led urban decoration
- led lighting Advertising,LED display
- safety protection apparatus
- Telecommunications, networks
- vehicle Lights, controller panels
