ce ROHS 100w led driver 12v dali slim dimmable power supply

model

SMT-0 12- 100 v m s ph

SMT-02 4-0 96 v m s ph

output

dc voltage

12VDC

24VDC

voltage tolerance

± 0. 5 v

± 0. 5 v

rated current

8.33 amp

4.0 amp

rated power

100 w

96 w

voltage regulation

± 0.5%

load regulation

± 2 % ± 1%

input

voltage range

100-277 v ac

frequency range

47 ～ 63HZ

power factor ( Typ. )@ full load

0. 9 8 @120VAC

0. 9 8 @120VAC

efficiency ( Typ. )@ full load （ Typ. ）

>8 8 %

> 8 8 %

ac current ( Max. )

1.2 a @100VAC

THD( Typ . ) @ full load

1 0 %@120VAC

1 0 %@120VAC

inrush current （ Typ. ）

4.1 a (twidth=220 us ) @120VAC ; 35.2 a (twidth=164 us ) @ 230 vac ;

12.8 a (twidth=960 us ) @ 277 vac ;

leakage current

<0.5mA

protection

short circuit

shut down o/p voltage , re-power on to recover after fault condition remove d

over load

≤120% hiccup mode ,recovers automatically after fault condition is removed or

shut down o/p voltage , re-power on to recover after fault condition remove d

protection class

i i

over temperature

100℃±10℃ shut down o/p voltage, automatically recover after cooling

environment

working TEMP.

-40 ~ + 6 0 ℃ (see below derating curve)

working humidity

20 ～ 9 5 %RH,non-condensing

storage TEM.,Humidity

-40 ～ +80℃ ， 10 ～ 95%RH

TEMP.coefficient

±0.03%/℃ （ 0 ～ 50℃ ）

vibration

10 ～ 500Hz, 5 g 10min./1 cycle,period for 60min. each along X,Y,Z axes

Safety&EMC

safety standards

EN61347-1 EN61347-2-13 (EU) and UL8750 (US)

withstand voltage

I/P-O/P:3.75KVAC (EU) and I/P-O/P: 1.88 KVAC (US)

isolation resistance

I/P-O/P ： 100M Ohms/500VDC/25℃/70%RH

EMC emission

compliance to EN55015, EN61000-3-2 ( ≥ 60%load) (EU) and fcc part 15 (US)

EMC immunity

compliance to EN61000-4-2,3,4,5,6,11, EN61547, light industry

Others

net weight

0. 29 kg

dimension

330 *3 0 * 22 mm ( L*W*H )

packing

350*330 * 145 m m/50 PCS/CTN G.W.:15.5KG/CTN

notes

1. all parameters not specially mentioned are measured at 230 vac input , rated load and 25℃of ambient temperature.

2. Tolerance: includes set up tolerance, line regulation and load regulation .

3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC directive on the complete installation again.