flicker free Europe 220v 300mA Dimmable LED Driver 12w With CE ROHS
Smarts electronic provide a kind of 0-10v dimmable constant current led driver 12w. they are with output current 250ma, 300ma, 350ma, 400ma,450ma, 500ma and 600ma. Work with 0-10v dimmer, PWM dimmers available. Full protection aluminum housing, for dry and damp location.
Specification:
|
Model |
SMT-45-0250CDH |
SMT-40-0300CDH |
SMT-35-0350CDH |
SMT-30-0400CDH |
||
|
Output |
DC Current |
250mA |
300mA |
350mA |
400mA |
|
|
|
Current Accuracy |
±3% |
||||
|
|
Voltage Range |
33-45V |
28-40V |
23-35V |
18-30V |
|
|
|
Rated power |
12W |
12W |
12W |
12W |
|
|
Input |
Voltage Range |
180～265VAC |
||||
|
|
Frequency Range |
47～63HZ |
||||
|
|
PF(Typ.） |
PF>0.9 |
||||
|
|
Full Load Efficiency（Typ） |
>86%(110V) >88%(220V) |
>86%(110V) >88%(220V) |
>86%(110V) >88%(220V) |
>86%(110V) >88%(220V) |
|
|
|
AC Current (Typ.） |
0.104A(110V) 0.106A(220V) |
0.102A(110V) 0.103A(220V) |
0.102A(110V) 0.103A(220V) |
0.101A(110V) 0.103A(220V) |
|
|
|
Leakage current |
<0.72mA/110VAC / ﹤0.75mA/220VAC |
||||
|
Protection |
Short Circuit |
Protection type: Hiccup mode, recovers automatically after fault condition is removed |
||||
|
|
Over Current |
≦1.4*Iout |
||||
|
|
Over temperature |
100℃±10℃ shut down o/p voltage, re-power on to recover |
||||
|
Environment |
Working TEMP. |
-40～+50℃ |
||||
|
|
Working Humidity |
20～95%RH,non-condensing |
||||
|
|
Storage TEM.,Humidity |
-40～+80℃，10～95%RH |
||||
|
|
TEMP.coefficient |
±0.03%/℃（0～50℃） |
||||
|
|
Vibration |
10～500Hz，5G 12min./1 cycle，period for 72min.each along X,Y,Z axes |
||||
|
Safety&EMC |
Safety standards |
EN61347-1 EN61347-2-13. IP20 |
||||
|
|
Withstand voltage |
I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC |
||||
|
|
Isolation resistance |
I/P-O/P I/P-FG O/P-FG：100MΩ/500VDC/25℃/70%RH |
||||
|
|
EMC EMISSION |
Compliance to EN55015,EN61000-3-2 (≧50%Load) |
||||
|
|
EMC IMMUNITY |
Compliance to EN61000-4-2,3,4,5,6,8,11,EN61547,A light industry level |
||||
|
|
SIZE |
85*45*26mm |
||||
Why Choose SMARTS dimmable led drivers:
We want to make sure that your LEDs dim perfectly and do not flicker. Therefore we only recommend that our drivers are to be dimmed with right dimmers. We have tested most installation situations and are 100% confident that Dimmers will function as promised with our SMARTS LED Drivers.
Dimming diagram of 0-10v dimming led driver:
Note: dimming wires is located in the dc output of our dimmable driver.
