Pilote d'alimentation led pwm DALI-2, tension constante variable 96w, pour bande led

Pilote d'alimentation LED PWM DALI-2, tension constante variable 96w, pour bande LED

Plage de tension d'entrée universelle 110-277vac Dali-2 & push 96W 24V pilote LED à intensité variable , fonction NFC intégrée, peut ajuster la tension de sortie et définir le code d'adresse. Avec protection contre les courts-circuits/surchauffes/surcharges. Avec 7 ans de garantie

  spécification 

  Spécification mécanique   

※Input & Output wiring 
※Input electronic cable 3*18AWG, the green cable connect with (FG) ,Black with AC (L), White with AC(N) (US);
※Output : 12V electronic cable 5*16AWG to be connected to LED Light;  
          24V electronic cable 5*18AWG to be connected to LED Light;  

※Dimming cable   
※Dimming electronic cable  2*18AWG, Pink DA/N and Purple DA/L (No polar) connected to the DALI BUS when use DALI function.
Pink (N) is connected to AC (N) while Purple (L) and pink (CCT Push )connected to CCT Push dim switch dimmer( L) when use Push function.
※Please make sure you connect these correctly otherwise your product will not function correctly and could be damaged.
RGBW dimming: electronic cable, Black is output ( V+) Positive, Red (R-), Green(G-), Blue (B-), White(W-) are output (V-) negative

Note:  there is external antenna at output side.  Don't disassemble!

  Dimming operation    

※Note: For DALI Dimming Wiring Diagram 2, please noted that only one DALI power is need in the DALI bus, so no extra DALI power is needed if the Master or Dimmer already includes the DALI Power. 

  DALI-2 address setting Operation  

※The default address for the DALI-2 LED driver is 001.

※Address settings device:

※Address settings:

① RDM setting address:

Set the address by the RDM device. For detailed operation, please refer to RDM device instruction manual.   

② NFC setting address:

The DALI-2 led drivers’ address can be read and written by a mobile with NFC APP or NFC handheld device (NFC read & write device: NFC-RW) by close to the NFC signal area of the DALI-2 LED drivers. 

■ Adjust output voltage Operation

※Adjust output voltage slightly for DALI-2 LED drivers

1) The driver output voltage can be read and written by a mobile with NFC APP or NFC handheld device (NFC read & write device: NFC-RW) by close to the NFC signal area of the DALI-2 LED drivers. 

2) Voltage range: level 1~10, each level is 0.2V. The default output voltage level is 1.

■ Comment définir l'adresse du pilote de LED CV DALI-2 via l'application NFC ou le périphérique NFC ?

Opération simple de réinitialisation de l'adresse du pilote LED DALI-2 et de réglage de la tension de sortie par un mobile avec l'application NFC  (définir NFC)  ou un appareil portable NFC (appareil de lecture et d'écriture NFC : NFC-RW) 

  Produits connexes